new office furniture a while ago, I wasn’t happy with the tack board that came with it. The tack board was to be installed underneath the upper shelving, but I hated the pattern on the fabric covering the tack board. I decided I needed to do something about it.
I cut a piece of canvas drop cloth to cover the tack board with a couple inches extra on the sides to fold over.
Using my hot glue gun I folded over the fabric and glued it on the back of the tack board.
I found it easier to make relief cuts in the corner because the canvas cloth is so bulky to work with.
Then I continued until all the sides were glued down.
Next, I stuck on strips of Velcro which would secure it to the office furniture. And with Velcro, I would be able to take the tack board down in case I ever want to recover it again.
Much better than that crazy patterned fabric. Since the office furniture is a dark black/brown color, the light colored drop cloth brightens it up a little. Check out another project I completed using drop cloth.
I shared this post at A Bowl Full of Lemons, Clean and Scentsible, Morganize with Me, Satori Design for Living